This purchase/service includes 1 new OEM GMC high security key cut to your 2015-2019 GMC Yukon & Yukon XL key code. This is a transponder, side milled, high security key.This key has a black plastic key bow with the Chevrolet bow tie logo. The key is guaranteed to be cut to the key code you provide and will operate the locks on your GM vehicle. You can email the key code after purchasing this item by sending an email to: keybitslock@gmail.com, or you can include the key code with your Paypal payment during the checkout process if you choose to pay through Paypal. 

How to find your key code:

• The key code was on the key tag included with the keys when the vehicle was new.
• Some GM trucks stamp the key code on the ignition lock
• Call your local GM Chevrolet dealership and they can find the key code using your vehicles VIN

If you can, email a picture of your key after paying for this item. This way I can verify that your key code is correct.

Since this is a transponder key, you must configure your vehicle to recognize the new key. The following programming instructions will not work on GM vehicles sold in Canada. Canadian buyers will require a special tool to communicate with the vehicles computer to configure the vehicle to recognize the new key. The follow programming instructions does not require any special tools for USA vehicles. Follow these instruction to configure your vehicle:

2014-2016 CHEVROLET SILVERADO AND GMC SIERRA,
2015-2016 CHEVROLET COLORADO AND GMC CANYON

TO PROGRAM A NEW KEY:
1. Insert the original, already programmed key in the ignition and turn the key to the ON/RUN position.
2. Turn the key to LOCK/OFF, and remove the key.
3. Insert the new key to be programmed and turn it to the ON/RUN position within five (5)
seconds. The security light will turn off once the key has been programmed.
4. Repeat steps 1-5 if additional keys are to be programmed.
If a key is lost or damaged, see your dealer to have a new key made.

PROGRAMMING WITHOUT A RECOGNIZED KEY (KEY VEHICLES ONLY)
This procedure will take approximately 30 minutes to complete for the first key.
The vehicle must be off and all of the keys must be with you.
1. Insert the new vehicle key into the ignition.
2. Turn to ON/RUN. The security light will come on.
3. Wait 10 minutes until the security light turns off.
4. Turn the ignition to LOCK/OFF.
5. Repeat steps 2-4 two more times. After the third time, turn to ON/RUN; the key is learned and
all previously known keys will no longer work the vehicle.
Remaining keys can be learned by following the procedure in “Programming with a Recognized
Key (Key Vehicles Only).”

---------------------------------------------------------------------------------------------------------------------------------------------------

FOR 2017 AND LATER MODELS
TO PROGRAM A NEW KEY:
1. Insert the original, already programmed key in the ignition and turn the key to the ON/RUN
position.
2. Turn the key to LOCK/OFF, and remove the key.
3. Quickly, within five (5) seconds, insert the second original already programmed key in the ignition
and turn the key to the ON/RUN position.
4. Turn the key to LOCK/OFF, and remove key.
5. Insert the new key to be programmed and turn it to the ON/RUN position within five (5) seconds.
The security light will turn off once the key has been programmed.
6. Repeat steps 1-5 if additional keys are to be programmed.
If a key is lost or damaged, see your dealer to have a new key made.

PROGRAMMING WITHOUT TWO (2) RECOGNIZED KEYS (KEY VEHICLES ONLY)
Program a new key to the vehicle when a recognizable key is not available. Canadian regulations
require that Canadian owners see their dealer.
If two (2) currently recognized keys are not available, follow this procedure to program the first key.
This procedure will take approximately 30 minutes to complete for the first key. The vehicle must be
off and all of the keys must be with you.
1. Insert the new vehicle key into the ignition.
2. Turn to ON/RUN. The security light will come on.
3. Wait 10 minutes until the security light turns off.
4. Turn the ignition to LOCK/OFF.
5. Repeat steps 2-4 two more times. After the third time, turn to ON/RUN; the key is learned and all
previously known keys will no longer work the vehicle.
6. To learn the second key, turn to OFF and insert the second key to be learned and rotate to ON/
RUN.
After two keys are learned, the remaining keys can be learned by following the procedure in
“Programming with Two (2) Recognized Keys (Key Vehicles Only).”